Pleion EGO 110, Installation And User Manual

Page: 57 / 67

Installation and user handbook – rev.0.4 of 23.02.2017
57
STARTING
USING THE COVER SHEET
The
“EGO”
solar collector with integrated storage is supplied with a PVC cover sheet which
darkens the surface that receives the sun's rays, therefore protecting the product against
overheating caused by direct exposure, above all in the case when the solar collector has
been installed but is not connected to the water system (therefore no water present).
The solar collector was not designed to be exposed directly to the sun's rays without being
filled with water. If empty, direct sunlight on the product overheats the internal
components, resulting in possible damage.
Image of the sticker on the cover sheet
The cover sheet must be kept in position from system installation to starting.
Do not remove it before having filled the collector.
Exposure to the sun when the system is empty can damage the product; in this case the
manufacturer will not recognise any guarantee rights.
If the solar collector is not covered when started, cover it with the supplied cover sheet or
with a suitable darkening system and wait for at least 3 hours before starting to charge the
system.
The system should be charged when cold (collector covered or early in the morning).
In order to be used again, the sheet should be folded up and stored away from excessive
heat and light.
Danger! If used again, position the sheet carefully, making sure that the black
PVC side is turned towards the outside.