Pleion EGO 110, Installation And User Manual

Page: 25 / 67

Installation and user handbook – rev.0.4 of 23.02.2017
25
INSTALLATION
GENERAL INDICATIONS AND MOVING
 Assembly, maintenance and cleaning must only be carried out by companies and
specialist staff.

The components indicated in this handbook must be used when assembling. The use of
other material is under the responsibility of the installer, who assumes full
responsibility, including the product guarantee.

The manufacturer is not liable for any work not carried out in a state-of-the-art manner,
as defined in Decree 37/2008, and for any damage caused to the structure or the tools
used.

Before installing and using the system, it is advisable to check local regulations and
laws to make sure that what is described in this document complies with them. Should
they be different, do not install the system and contact the manufacturer.

The manufacturer is not liable for any damage caused to things and injury to people as a
result of installation carried out without respecting local regulations and laws.
The system can only be moved when empty and extremely carefully. Do not
use or apply force to the plastic threaded connections in order to lift the product.

Avoid knocks and pressure on the system, in particular on the cover, base and the
plastic connections that project from the frame.

Do not place any load on the system.

When moving, always use people who are competent, trained and equipped according
to what is imposed by laws in force. Always use means of transport, lifting devices,
chains and any other things that are of a suitable capacity and size.