Pleion EGO 110, Installation And User Manual, Page: 29 / 67

Installation and user handbook – rev.0.4 of 23.02.2017
29
The longest side of the collector must always be supported by the surface. Do not install
the collector with the short side (where the connections are) against the surface.
Do not turn the collector upside down. The outflow should be positioned at the top, and can
be identified by its red cap (inflow at the bottom, identified by a blue cap). Correct
operation cannot be guaranteed if the system is installed upside down.
Necessary items

2 spanners, 13 mm

individual PPE (helmet, gloves, goggles, etc...)
Danger! The screws for fixing the supports to the roof are not supplied. They
must be obtained by the installer, following the indications of the structural technician.