90
BRACKET
5/16" WASHER
BRACKET
HEX BOLT
90
5/16" X 1-1/2"
2 X 4 X 47-3/8" FACE BOARD
"
2
3 1
34 "
WASHERS.
BRACKETS TO THE 2 X 4 WITH TWO 5/16" X 1-1/2" HEX BOLTS AND TWO 5/16"
T-NUT
STEP 19: ATTACHING THE LADDER
1: LAY THE 2 X 4 X 47-3/8" FACE BOARD ON A FLAT SURFACE AND PLACE THE LADDER ON TOP
OF IT. MAKE SURE THE LEFT SIDE OF THE LADDER IS 3-1/2" FROM THE LEFT END OF THE FACE
BOARD. THE BOTTOM EDGE OF THE 90 BRACKETS SHOULD BE 3/4" UP FROM THE BOTTOM EDGE
OF THE 2 X 4. MARK THE POSITION OF THE BRACKET HOLES ON THE 2 X 4 AS SHOWN BELOW.
2: DRILL 3/8" HOLES WHERE MARKED.
3: INSERT 5/16" T-NUTS IN THE BACK OF THE HOLES.
4: ATTACH THE 90
49
