2 X 4 X 17"
5/16" T-NUT
HEX BOLT
LADDER BACK
5/4 X 4 X 18-1/2"
2" WOOD SCREW
LADDER STEP
GREEN BRACKET
5/4 X 4 X 57"
LADDER SIDE
90
5/16" X 1-1/2"
5/16" WASHER
2" WOOD SCREW
STEP 18: LADDER ASSEMBLY
1: LAY ONE 2 X 4 X 57” LADDER SIDE ON A FLAT SURFACE WITH CHANNELS FACING DOWN.
PLACE THE BARREL OF A T-NUT IN THE HOLE AT THE TOP OF THE LADDER SIDE, AND SECURE WITH A
HAMMER. REPEAT THIS STEP FOR THE OTHER LADDER SIDE.
2: FLIP THE LADDER SIDE OVER SO THAT THE CHANNELS ARE FACING UP.
3: PLACE THE LADDER STEPS INTO THE CHANNELS, AND THEN PLACE THE SECOND LADDER SIDE
ON TOP, WITH THE CHANNELS FACING DOWN.
4: NOW PLACE TWO 2” WOOD SCREWS IN EACH STEP.
5: CAREFULLY TURN THE LADDER OVER AND FINISH THE OTHER SIDE WITH TWO 2” WOOD SCREWS
PER STEP.
6: INSTALL TWO 90 GREEN BRACKETS USING 5/16” X 1-1/2” BOLTS AND 5/16” WASHERS.
7: INSTALL THE 5/4 X 4 X 18 1/2” LADDER BACK ABOVE THE OPENING OF THE TOP CHANNELS WITH
TWO 2” WOOD SCREW PER SIDE.
48
