STEP 10: CORNER POSTS
1: LOCATE TWO 4 X 4 X 40-1/2" CORNER POST - LEFT AND TWO 4 X 4 X 40-1/2" CORNER
POST - RIGHT. THE CORNER POST - RIGHT HAS THREE HOLES IN THE TOP AND THE CORNER
POST - LEFT HAS TWO HOLES IN THE TOP. THE COUNTERBORED HOLES IN THE CORNER
POSTS FACE EACH OTHER ON THE INSIDE OF THE ASSEMBLY.
2: INSTALL A T-NUT INTO THE BOTTOM HOLE OF EACH CORNER POST ON THE INSIDE AS
SHOWN.
3: PLACE THE BOTTOM END OF EACH CORNER POST BETWEEN THE INNER AND OUTER
FORT SUPPORTS AND LINE UP THE BOTTOM HOLE IN THE CORNER POST WITH THE HOLE IN
THE OUTER FORT SUPPORT.
4: ATTACH EACH CORNER POST TO THE OUTER FORT SUPPORTS WITH 5/16" X 4-1/2" HEX
BOLTS AND 5/16" WASHERS.
CORNER POST - RIGHT
COUNTERBORED HOLES
THE INSIDE.
FACE EACH OTHER ON
CORNER POST - RIGHT
CORNER POST - LEFT
T-NUT
5/16" X 4-1/2"
HEX BOLT
5/16" X 4-1/2"
HEX BOLT
5/16" WASHER
5/16" WASHER
SUPPORT
OUTER FORT
5/16" WASHER
T-NUT
HEX BOLT
5/16" WASHER
5/16" X 4-1/2"
INNER
FORT
SUPPORT
35
