1 14 "
**STEP 1A: ADDENDUM**
1: BEFORE PROCEEDING TO STEP 2 INSTALL THE 2 X 4 X 80" ROPE LADDER RUNNER. LINE UP THE
HOLES IN THE ROPE LADDER RUNNER WITH THE HOLES IN THE LADDER SIDES.
2: INSTALL T-NUTS INTO THE HOLES IN THE BACK SIDE OF THE ROPE LADDER RUNNER.
3: FASTEN THE ROPE LADDER RUNNER TO THE LADDER SIDES WITH 5/16" X 4-1/2" HEX BOLTS
AND 5/16" WASHERS.
4: NOW PLACE A 2 X 6 X 30-3/4" LADDER STEP INSIDE THE NOTCHED AREA OF THE LADDER
SIDES AT THE BOTTOM NOTCH. LET THE FRONT EDGE OF THE STEP PROTRUDE PAST THE FRONT
SURFACE OF THE LADDER BY 1-1/4" AS SHOWN IN THE PICTURE AT THE RIGHT BELOW.
5: USE THE HOLES DRILLED IN STEP 1 TO FASTEN THE LADDER SIDES TO THE LADDER STEP WITH
#10 X 3-1/2" WOOD SCREWS.
5/16" X 4-1/2" HEX BOLT
WOOD SCREW
ROPE LADDER RUNNER
2 X 4 X 80"
5/16" WASHER
T-NUT
T-NUT
#10 X 3-1/2"
LADDER STEP
(4 PER STEP)
LADDER SIDES
2 X 6 X 30-3/4"
NOTE ANGLED END
26
