1 14 "
LADDER SIDE
LADDER SIDE
T-NUT
T-NUT
T-NUT
4 X 4 X 65-1/4"
(LEFT)
(RIGHT)
T-NUT
#10 X 3-1/2"
WOOD SCREW
(4 PER STEP)
4 X 4 X 65-1/4"
2 X 6 X 30-3/4"
LADDER STEP
STEP 2: ASSEMBLING THE LADDER
1: INSTALL A T-NUT INTO THE HOLES ABOVE THE LADDER STEPS AS SHOWN BELOW. THE
TOPMOST HOLES GET A T-NUT ON THE INSIDE WHILE THE LOWER HOLES GET A T-NUT ON
THE OUTSIDE.
2: PLACE A 2 X 6 X 30-3/4" LADDER STEP INSIDE THE NOTCHED AREA OF EACH LADDER
SIDE. LET THE FRONT EDGE OF THE STEP PROTRUDE PAST THE FRONT SURFACE OF THE
LADDER BY 1-1/4" AS SHOWN IN THE PICTURE AT THE LOWER RIGHT BELOW.
3: USE THE HOLES DRILLED IN STEP 1 TO FASTEN THE LADDER SIDES TO THE LADDER STEPS
WITH #10 X 3-1/2" WOOD SCREWS.
27
