PLATFORM BASKET RR 14 EVO 2-400 Hybrid Use And Maintenance Manual Download Page 58

Page: 58 / 150

RR 14 EVO 2-400 HYBRID

JS1

Boom and turret proportional movement

joystick

Lever in direction

the telescopic boom

descends.

Lever in direction

the telescopic boom

ascends.

Lever in direction

the turret turns

clockwise.

Lever in direction

the turret turns anti-

clockwise.

GRUPPO

JS2

Lower extension/boom proportional boom

joystick

Lever in direction

the lower boom

descends.

Lever in direction

the lower boom ascends.

Lever in direction

the telescopic elements

retract.

Lever in direction

the telescopic elements

exit.

GRUPPO

JS3

Proportional joystick for the machine

movement and steering

Lever in direction

the machine traverses

forward.

Lever in direction

the machine traverses

backward.

Right button on the Joystick: press to steer to

the right.

Left button on the Joystick: press to steer to

the left.

JS3

Measuring pole handling joystick

(Optional)

Note

In order to use the measuring pole, you must

configure the machine for rail work.

Right switch on the joystick: press to raise

the pole.

Left switch on the joystick: press to lower the

pole.

GRUPPO

English

58/150

Summary of Contents for RR 14 EVO 2-400 Hybrid























































































































































Search results

Summary of Contents for RR 14 EVO 2-400 Hybrid

Reviews:

Related manuals for RR 14 EVO 2-400 Hybrid

Brands by name

Popular brands

PLATFORM BASKET RR 14 EVO 2-400 Hybrid, Use And Maintenance Manual

Search results

Summary of Contents for RR 14 EVO 2-400 Hybrid

Reviews:

Related manuals for RR 14 EVO 2-400 Hybrid

Brands by name

Popular brands