PLATFORM BASKET RR 14 EVO 2-400 Hybrid, Use And Maintenance Manual

Page: 91 / 150

RR 14 EVO 2-400 HYBRID
9.8. AERIAL PART MOVEMENT
In the event of an overload alarm, the message (A)
will appear on the display.
Once the excess load has been removed from the
basket, the alarm will turn off.
If the alarm persists:
Only when the person in charge of assistance resets
the event logs of the machine will it be possible to
turn off the alarm.
GRUPPO
9.8.1. OPENING
‒ Start the engine (see “start/stop engine”).
The aerial part is normally moved by the
operator in the basket. It is therefore,
necessary to move the switch (SA37) to
“basket position” (See "control panel on the
ground").
If it becomes necessary to move the aerial part
from the ground, it is necessary to move the
switch (SA37) to “ground position” (See
"control panel on the ground").
‒ Climbing into the basket.
‒ Check that the sliding bar which protects the
opening of the basket is closed and positioned
correctly.
‒ Attach the safety belt to the safety ring.
‒ 1 Command the (SA76) “Jib” movement to
move away from the carriage.
‒ 2 Command the (JS2) lifting of the pantograph
boom from the support column.
‒ 3 Turn the column (JS1) in the direction of the
point of work.
‒ 4 Lift the telescopic boom ( (JS1) .
‒ Adjust the search for the exact point of work by
moving the extension (JS2) , the jib (SA76) and
rotating the basket ( (SA74) .
GRUPPO
English
91/150