PLATFORM BASKET RR 14 EVO 2-400 Hybrid, Use And Maintenance Manual

Page: 45 / 150

RR 14 EVO 2-400 HYBRID
4.4.5. BOLT AND SCREW TIGHTENING
The tightening torque table (see the pages specified) consists of standard torque values, based on the
diameter and the class (hardness) of the screws; this also establishes the torque values with and without
lubricants according to the practice recommended by the factory.
This table is provided for the purpose of helping the user or the operator if the need should arise for
immediate adjustment during an inspection or operation so that the maintenance service personnel are
informed.
Using the tightening torque table in combination with the index of the points to be tightened shown in the
chapter entitled “Maintenance” will improve the safety and performance of the machine.
4.4.6. DAILY VISUAL INSPECTION
Inspection on workdays before starting up the machine comes under the responsibility of the operator and the
user.
Operators and users are advised to inspect the machine before use, even if the machine has already been
used by another user/operator.
This daily visual inspection is the best inspection system.
These checks must also be made after maintenance has been done to the machine.
In addition to the daily visual inspection, make sure that the following operations are included as a part of the
daily inspection procedure:
‒ General cleaning.
Check that all the weight-bearing surfaces are free of spills of oil, fuel, hydraulic oil, mud and foreign
bodies. Check the general cleanliness.
‒ Plates.
Keep all the plates showing information and control labels clean and visible. To keep them visible it is
advisable to cover them when spraying paint or sand blasting.
‒ Operating and maintenance manual.
Ensure that a copy of this manual is kept in the special container.
‒ Machine logbook.
Ensure that notes are kept, or even better a logbook for the machine; ensure that it is kept up to date
and that nothing is left in doubt, as this could reduce the safety of the machine.
‒ Begin each working day with the batteries charged and/or a full tank of fuel.
I
Caution
To avoid injury, do not operate the machine unless all breakdowns have been repaired.
The use of a defective machine constitutes a violation of the safety rules.
To avoid injuries ensure that the electrical current is switched off during the daily visual inspection.
|
Note
Check visually and manually that the safety micro-switches are in position and that they are working correctly.
|
Note
After changing the oil on new and recently overhauled machines and all those which have had the hydraulic oil
changed, operate all the movements for at least two full cycles and check the oil level in the tank again.
‒ Ensure that all the parts requiring lubrication are given maintenance.
Refer to the specific pages for the methods to be adopted.
4.4.7. GENERAL INSPECTION
Begin the visual inspection from the number on the list shown below. Continue to check the condition of each
part indicated in the list of daily visual inspection checks.
I
Caution
To avoid injury, do not operate the machine unless all breakdowns have been repaired.
The use of a defective machine constitutes a violation of the safety rules.
To avoid injuries ensure that the electrical current is switched off during the daily visual inspection.
English
45/150