PLATFORM BASKET RR 14 EVO 2-400 Hybrid, Use And Maintenance Manual

Page: 123 / 150

RR 14 EVO 2-400 HYBRID
11.15. EXTENSION GREASING
Configure the stabilised machine with the boom
positioned horizontally and extended as far as it will
go.
Scrape off the old layer of grease with a plastic
spatula.
Spread on a new layer of grease using a brush.
I
Caution
The parts which remain inside the telescopic
components will be lubricated by the grease which
penetrates the pits of the upper and lower sliding
wear pads.
I
Caution
Use lubricant grease having the same characteristics
as that shown in the specific table in this section.
GRUPPO
11.16. LUBRICANTS TABLE
I
Caution
All maintenance work must be done with the motor switched off and the machine in the rest position.
I
Caution
Do not use oil, grease other than that recommended by the Manufacturer.
Brush grease Grease for grease
nipples
TOTAL MULTIS
EP 2
MULTIS
EP 2
MOBIL MOBIL
GREASE
MP
MOBIL
GREASE
MP
ESSO BEACON
EP2
BEACON
EP2
AGIP GR MU
EP 2
GR MU
EP 2
IP ATHESIA
EP2
ATHESIA
EP2
BP ENERGREASE
LR MP
ENERGREASE
LR MP
11.16.1. THE HYDRAULIC SYSTEM OIL
The oil to be used must have the following features.
‒ biodegradable synthetic oil.
‒ viscosity = 46 cst at 40°C according to ISO ISO 3104 method.
For the initial filling you can use:
SYNECO ECO OIL 46;
FAREN AXOL LUBE HEES 46;
ENI ARNICA S46 .
English
123/150