Planex MZK-WDPR, User Manual

Page: 48 / 112

System Configuration
5-12
5
• Server IP – Sets the L2TP server IP Address.
(Default: l2tp_server; Range: 1~32 characters)
• Username – Sets the L2TP user name for the WAN port.
(Default: l2tp_user; Range: 1~64 characters)
• Password – Sets a L2TP password for the WAN port. (Default: l2tp_password; Range:
1~32 characters)
• Verify Password – Prompts you to re-enter your chosen password.
• Address Mode – Sets a L2TP network mode. (Default: Static)
• IP Address – Sets the static IP address. (Default: 0.0.0.0, available when L2TP Network
Mode is set to static IP.)
• Subnet Mask – Sets the static IP subnet mask. (Default: 255.255.255.0, available when
L2TP Network Mode is set to static IP.)
• Default Gateway – The IP address of the gateway router for the Multimedia Router,
which is used if the requested destination address is not on the local subnet.
• Operation Mode – Selects the operation mode as Keep Alive, On Demand or Manual.
(Default: Keep Alive)
-
Keep Alive Mode : The Multimedia Router will periodically check your Internet
connection and automatically re-establish your connection when disconnected.
(Default: 60 seconds)
- On Demand Mode : The maximum length of inactive time the unit will stay connected
to the DSL service provider before disconnecting. This feature only works when
Connect Type is set to “Auto-Connect.” (Default: 5 minutes)
• MAC Clone Mode – Some ISPs limit Internet connections to a specified MAC address
of one PC. This setting allows you to manually change the MAC address of the
Multimedia Router's WAN interface to match the PC's MAC address provided to your
ISP for registration. You can enter the registered MAC address manually by typing it in
the boxes provided. Otherwise, connect only the PC with the registered MAC address
to the Multimedia Router, then click the “Fill My MAC” (Default: Disable)
PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing virtual private
networks. The service is provided in many European countries.