Planex MZK-WDPR, User Manual

Page: 46 / 112

System Configuration
5-10
5
• PPPoE Password – Sets a PPPoE password for the WAN port.
(Default: pppoe_password; Range: 1~32 characters)
• Verify Password – Prompts you to re-enter your chosen password.
• Operation Mode – Selects the operation mode as Keep Alive, On Demand or Manual.
(Default: Keep Alive)
-
Keep Alive Mode : The Multimedia Router will periodically check your Internet
connection and automatically re-establish your connection when disconnected.
(Default: 60 seconds)
- On Demand Mode : The maximum length of inactive time the unit will stay connected
to the DSL service provider before disconnecting. This feature only works when
Connect Type is set to “Auto-Connect.” (Default: 5 minutes)
• MAC Clone Mode – Some ISPs limit Internet connections to a specified MAC address
of one PC. This setting allows you to manually change the MAC address of the
Multimedia Router's WAN interface to match the PC's MAC address provided to your
ISP for registration. You can enter the registered MAC address manually by typing it in
the boxes provided. Otherwise, connect only the PC with the registered MAC address
to the Multimedia Router, then click the “Fill My MAC” (Default: Disable)
L2TP
Enables the Layer Two Tunneling Protocol (L2TP) for implementing virtual private
networks. The service is provided in many European countries.