Planex MZK-WDPR, User Manual

Page: 33 / 112

Using the Setup Wizard
4-11
4
Figure 4-8. Setup Wizard - 3G
• Pin Code Protect – Enables the use of a PIN code (personal identification number) to
encrypt access to the wireless 3G connection. Some service providers do not require
PIN code authentication. If the PIN code for your 3G/3.5G modem is disabled, disable
this function (Default: Enabled). Specifies a PIN code number that corresponds with that
set on your 3G/3.5G USB modem and displays the status of the 3G connection.
-
Not dial yet
: Indicates that the PIN code has not been entered or is incorrect.
-
Authenticated successfully
: Indicates that the 3G connection has
authenticated successfully.
• Dial Code : A dialled access code that connects the USB device to the service provider.
• APN Service : The name that uniquely identifies the cellular operator, access point
name (APN).
• 3G Username : The username of the account registered with the service provider.
• 3G Password : The password of the account registered with the service provider.
• Connect Type : Selects the connection type as Keep Alive or Auto Connect.
(Default: Auto Connect)
• 3G Max Idle Time : The maximum length of inactive time the unit will stay connected to
the DSL service provider before disconnecting. This feature only works when Connect
Type is set to “Auto-Connect.” (Default: 300 seconds)
• Budget Control : You can set a monthly limit on time or the total data. For more details,
please refer to the following table.
4. Basic Wireless Settings – Configures the SSID and sets the wireless security
policy. Click Apply after completing the setup.