Planex BRC-14VG User Manual Download

Page: 258 / 305

258

Caution:

If the status does not change from [Format] for a long period of time, click on the [Refresh]

button.

11. If there is any other [Unallocated Space], you can repeat the steps above to create

additional partitions.

11.1.5 Attaching a Formatted USB Storage Device

Note that the hard disk formats supported by the product are FAT16, FAT32 and EXT2 only.

Hard disks formatted with other format modes need to be reformatted with your PC or the

product itself.

The following steps illustrate the procedure to reformat a USB storage device that has been

already formatted with the NTFS file system.

1. Attach your USB storage device to the product as shown in p.

○

2. Click on the [Home] icon on the side bar.

Wait until the status is
[Ready]

Summary of Contents for BRC-14VG


















































































































































































































































































































Search results

Summary of Contents for BRC-14VG

Reviews:

Related manuals for BRC-14VG

Brands by name

Popular brands

Planex BRC-14VG, User Manual

Search results

Summary of Contents for BRC-14VG

Reviews:

Related manuals for BRC-14VG

Brands by name

Popular brands