Planex BRC-14VG User Manual Download Page 216

Page: 216 / 305

216

3. Enter the host name and domain name of the product in the [System] section.

[Hostname]

Enter the host name of the product.

[Local Domain]

Enter the domain name you wish to use within the LAN.

4. If an option USB hard disk has been attached to the product, enter the [NetBIOS

Workgroup] name in the [File Server] section.

[NetBIOS Workgroup]

Enter the work group name used in your LAN.

5. In the Management Console section, configure the [Automatic Refresh of System

Monitoring Web Pages] and [Warn User Before Network Configuration Changes] options.

[Automatic Refresh of System Monitoring Web Pages]

Select to enable the automatic refresh function of the System Monitoring pages.

[Warn User Before Network Configuration Changes]

If enabled, the product shows a warning message when network configuration is
modified.

[System Settings] window

Enter the host name and
domain name of the product

Configure

Summary of Contents for BRC-14VG


















































































































































































































































































































Search results

Summary of Contents for BRC-14VG

Reviews:

Related manuals for BRC-14VG

Brands by name

Popular brands

Planex BRC-14VG, User Manual

Search results

Summary of Contents for BRC-14VG

Reviews:

Related manuals for BRC-14VG

Brands by name

Popular brands