Planex BRC-14VG User Manual Download

Page: 221 / 305

221

10.5 Upgrading Firmware

Follow the steps below to first download the latest firmware from our web site and then

update the firmware of the product.

Caution:

- Prior to firmware upgrade, be sure to disconnect from the Internet. All the PC’s on the

LAN but the one used to upgrade firmware of the product need to be turned off. ,

- If firewall or virus scan application is installed on the PC above, be sure to quit such

application before upgrading firmware.

- This update process is a proprietary service provided by PCI and it does not guarantee

any addition of new function or performance enhancement. .

1. Download the latest firmware from our web site and save it in the hard disk of the PC

through which the firmware of the product is upgraded.

2. Click on the [Advanced] icon on the side bar.

3. Click on the [Firmware Upgrade] icon.

Click

Summary of Contents for BRC-14VG


















































































































































































































































































































Search results

Summary of Contents for BRC-14VG

Reviews:

Related manuals for BRC-14VG

Brands by name

Popular brands

Planex BRC-14VG, User Manual

Search results

Summary of Contents for BRC-14VG

Reviews:

Related manuals for BRC-14VG

Brands by name

Popular brands