Planet WGSD-1022 User Manual Download Page 44

Page: 44 / 382

User’s Manual of WGSD-1022/WGSD-8000

- 44 –

IEEE 802.1Q (tagged) VLAN are implemented on the Switch. 802.1Q VLAN require tagging, which enables them to span the

entire network (assuming all switches on the network are IEEE 802.1Q-compliant).

VLAN allow a network to be segmented in order to reduce the size of broadcast domains. All packets entering a VLAN will only

be forwarded to the stations (over IEEE 802.1Q enabled switches) that are members of that VLAN, and this includes broadcast,

multicast and unicast packets from unknown sources.

VLAN can also provide a level of security to your network. IEEE 802.1Q VLAN will only deliver packets between stations that are

members of the VLAN. Any port can be configured as either tagging or untagging. The untagging feature of IEEE 802.1Q VLAN

allows VLAN to work with legacy switches that don't recognize VLAN tags in packet headers. The tagging feature allows VLAN

to span multiple 802.1Q-compliant switches through a single physical connection and allows Spanning Tree to be enabled on all

ports and work normally.

Any port can be configured as either tagging or untagging. The untagging feature of IEEE 802.1Q VLAN allows VLAN to work

with legacy switches that don’t recognize VLAN tags in packet headers. The tagging feature allows VLAN to span multiple

802.1Q-compliant switches through a single physical connection and allows Spanning Tree to be enabled on all ports and work

normally.

Frame Income

Frame Leave

Income Frame is

tagged

Income Frame is

untagged

Leave port is tagged

Frame remains tagged

Tag is inserted

Leave port is untagged

Tag is removed

Frame remain untagged

In this field, there are five items, such as Create VLAN, Port setting, Ports to VLAN, VLAN to Ports, GVRP…

4.4.1 Create VLAN

In this table, the information and global parameters for configuring and working with VLAN s will be provided (see figure 4-10).

Summary of Contents for WGSD-1022































































































































































































































































































































































































Search results

Summary of Contents for WGSD-1022

Reviews:

Related manuals for WGSD-1022

Brands by name

Popular brands

Planet WGSD-1022, User Manual

Search results

Summary of Contents for WGSD-1022

Reviews:

Related manuals for WGSD-1022

Brands by name

Popular brands