User’s Manual of WGSD-1022/WGSD-8000
- 238 –
Syntax
lacp timeout
{
long | short
}
no lacp timeout
long
— Specifies a long timeout value.
Short
— Specifies a short timeout value.
Default Configuration
The default port timeout value is
long
.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example assigns an administrative LACP timeout for port e8 to a long timeout value.
Console (config)#
interface ethernet e8
Console (config-if)#
lacp timeout long
5.11.4 show lacp ethernet
The
show lacp ethernet
privilege EXEC command displays LACP information for Ethernet ports.
Syntax
show lacp ethernet interface
[
parameters
|
statistics
|
protocol-state
]
Interface
— Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to display LACP statistics information.
Console#
show lacp ethernet
e1
statistics
