User’s Manual of WGSD-1022/WGSD-8000
- 163 –
5.3.3 login authentication
The login authentication line configuration command specifies the login authentication method list for a remote telnet or console.
To return to the default specified by the authentication login command, use the
no
form of this command.
Syntax
login authentication
{
default
|
list-name
}
no login authentication
default
— Uses the default list created with the
authentication login
command.
list-name
— Uses the indicated list created with the
authentication login
command.
Default Configuration
Uses the default set with the command
authentication login
.
Command Mode
Line Configuration mode
User Guidelines
Changing login authentication from default to another value may disconnect the telnet session.
Example
The following example specifies the default authentication method for a remote Telnet or console.
console (config) #
line cnsole
console (config-line) #
login authentication default
5.3.4 enable authentication
The
enable authentication
line configuration command specifies the authentication method list when accessing a higher
privilege level from a remote telnet or console. To return to the default specified by the
enable authentication
command, use
the
no
form of this command.
Syntax
enable authentication
{
default
|
list-name
}
no enable authentication
default
— Uses the default list created with the
authentication enable
command.
list-name
— Uses the indicated list created with the
authentication enable
command.
Default Configuration
Uses the default set with the command
authentication enable
.
