User’s Manual of WGSD-1022/WGSD-8000
- 161 –
none
Uses no authentication.
radius
Uses the list of all RADIUS servers for authentication. Uses username
tacacs
Uses the list of all TACACS servers for authentication. Uses username
Default Configuration
The local user database is checked. This has the same effect as the command
aaa authentication login listname local
.
Note:
On the console, login succeeds without any authentication check if the authentication method is not defined.
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the
aaa authentication login
command are used with the
login
authentication
command.
Create a list by entering the
aaa authentication login list-name method
command for a particular protocol, where
list-name
is
any character string used to name this list. The
method
argument identifies the list of methods that the authentication algorithm
tries, in the given sequence.
The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the
authentication succeeds even if all methods return an error, specify
none
as the final method in the command line.
Example
The following example configures authentication login.
console (config) #
aaa authentication login default radius local enable none
5.3.2 aaa authentication enable
The
aaa authentication enable
global configuration command defines authentication method lists for accessing higher
privilege levels. To return to the default configuration use the
no
form of this command.
Syntax
aaa authentication enable
{
default
|
list-name
}
method1
[
method2
...]
no aaa authentication enable default
default
— Uses the listed authentication methods that follow this argument as the default list of methods,when using
higher privilege levels.
list-name
— Character string used to name the list of authentication methods activated, when using accesshigher
privilege levels.