User’s Manual of WGSD-1022/WGSD-8000
- 349 –
User Guidelines
The command automatically removes the port from the previous VLAN, and adds it to the new VLAN.
Example
The following example configures a VLAN ID of 23 to the untagged layer 2 VLAN interface number e8.
Console (config)#
interface ethernet e8
Console (config-if)#
switchport access vlan
23
5.27.9 switchport trunk allowed vlan
The
switchport trunk allowed vlan
interface configuration command adds or removes VLANs from a trunk port.
Syntax
switchport trunk allowed vlan
{
add vlan-list
|
remove vlan-list
}
add vlan-list
— List of VLAN IDs to add. Separate non consecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
remove vlan-list
— List of VLAN IDs to remove. Separate non consecutive VLAN IDs with a comma and no spaces. A
hyphen designate a range of IDs.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to add VLANs 2 and 5 to 8 to the allowed list of e8.
Console (config)#
interface ethernet e8
Console (config-if)#
switchport trunk allowed vlan add
2,5-8
