Step 3. Pole Mounting:
(1) Thread two mounting straps through the mounting bracket on the back of the device
(2) Position the device on a pole and secure both mounting straps to finish the installation.
Step 4. Wall Mounting:
(1) Secure the adhesive label to a position on the wall where you would like to install the device
(2) Follow the plotting sticker to drill two holes and secure the plastic anchors
(3) Align the screw holes on the mounting bracket with the screws and then
wall to finish the installation
User Manual of WAP
-18-
mounting straps through the mounting bracket on the back of the device
Position the device on a pole and secure both mounting straps to finish the installation.
Figure 2-3 Pole Mounting
Secure the adhesive label to a position on the wall where you would like to install the device
Follow the plotting sticker to drill two holes and secure the plastic anchors
Align the screw holes on the mounting bracket with the screws and then
to finish the installation.
Figure 2-4 Wall Mounting
WAP-500N/WBS-500N
mounting straps through the mounting bracket on the back of the device.
Position the device on a pole and secure both mounting straps to finish the installation.
Secure the adhesive label to a position on the wall where you would like to install the device.
Follow the plotting sticker to drill two holes and secure the plastic anchors.
Align the screw holes on the mounting bracket with the screws and then install the device on the
