Disabled
Authentication is disabled and no password/key is required to connect to the access point.
WEP
WEP (Wired Equivalent Privacy) is a
encryption.
Figure
The security mode includes the following settings
Object
Description
•
Security Mode
Select
using WEP encryption method.
•
Auth Type
Select Open System or Shared.
•
Input Type
Select an input type of Hex or ASCII.
•
Key Length
Level of WEP encryption
Select a 64
•
Default Key
Select 1
default.
User Manual of WAP
-52-
Authentication is disabled and no password/key is required to connect to the access point.
Equivalent Privacy) is a basic encryption. For a higher level of security consider using
Figure 4-31 Security Settings – WEP
The security mode includes the following settings:
Description
Select WEP from the drop-down list to configure the wireless network
using WEP encryption method.
Select Open System or Shared.
Select an input type of Hex or ASCII.
Level of WEP encryption is applied to all WEP keys.
Select a 64-/128-/152-bit password length.
40/64-bit: enter 10 hexadecimal digits (any combination of 0
A-F and null key is not permitted) or 5 ASCII characters.
104/128-bit: enter 26 hexadecimal digits (any combination of
a-f, A-F and null key is not permitted) or 13 ASCII characters.
128/152-bit: enter 32 hexadecimal digits (any combination of 0
a-f, A-F and null key is not permitted) or 16 ASCII characters.
Select 1 – 4 to specify which of the four WEP keys the device
default.
WAP-500N/WBS-500N
Authentication is disabled and no password/key is required to connect to the access point.
level of security consider using the WPA
configure the wireless network
applied to all WEP keys.
enter 10 hexadecimal digits (any combination of 0-9, a-f,
F and null key is not permitted) or 5 ASCII characters.
hexadecimal digits (any combination of 0-9,
ASCII characters.
hexadecimal digits (any combination of 0-9,
ASCII characters.
WEP keys the device uses as its
