- 22 -
Allow trusted
stations only
This feature can be used to prevent unknown Wireless stations from
using the WAP-4050. To use this feature:
·
Select the checkbox.
·
Click the
Trusted Stations
button to open a sub-window
containing the
Trusted Wireless Stations
screen, where you
can enter details of the Trusted Wireless Stations. See the
following section for further details.
Warning:
Ensure your own PC is in the Trusted Stations list before
you enable this feature.
Copy AP Mode
Settings
Clicking this button will copy the Wireless settings, including the
Trusted Station list, from the AP mode to AP/Router mode.
·
This is only useful if you already completed the configurations of
AP mode.
·
The SSID will not be copied. Each mode must use a different
SSID. Using the same SSID for different modes would confuse
wireless clients.
Ethernet (WAN) Port
IP address
The current IP address for the Ethernet port. This will be blank if:
·
The WAP-4050 is not in AP/Router mode.
·
The WAP-4050 is in AP/Router mode, but there is no active
connection on the Ethernet (WAN) port.
Note
: In AP/Router mode, the WAP-4050 has 2 IP addresses, one
for the Wireless interface, and another for the Ethernet (WAN) port.
MAC Address
The MAC address, also called the Physical address, is a low-level
identifier for Ethernet connections. This field displays the MAC
address for the Ethernet (WAN) port.
Connection
Type
The login method is the type of connection used on the Ethernet
(WAN) port.
·
The default value is
Travel Mode (Hotel)
. This mode requires
no additional information to be input.
·
To change the Login method, click the
Configure
button.
Connection
Status
This indicates the current status of the connection on the Ethernet
(WAN) port.
This can only show
Connected
if the WAP-4050 is in AP/Router
mode.
