- 34 -
Connection
Physical Address
The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
IP Address
The IP Address of this device, as seen from the Ethernet (WAN)
Port interface. If using DHCP, and there is no current connection,
this will be blank or 0.0.0.0.
Connection Status
This indicates whether or not the connection is currently
established.
·
If the connection does not exist, the
Connect
button can be
used to establish a connection.
·
If the connection currently exists, the
Disconnect
button can
be used to break the connection.
Connection Log
Connection Log
·
The Connection Log shows status messages relating to the
existing connection.
·
The
Clear Log
button will restart the Log, while the
Refresh
button will update the messages shown on screen.
Buttons
Connect
If not connected, establish a connection to your ISP.
Disconnect
If connected to your ISP, hang up the connection.
Clear Log
Delete all data currently in the Log. This will make it easier to read
