Planet NAS-3410 User Manual Download

Page: 87 / 108

File Types to Scan

1. Click the desire scan file type.

2. If

All file types

is selected, all files regardless to its file extension will be scanned.

3. If

Files with specified file extensions Only

is selected, specify using the recommended

extensions recommended by Trend Micro or specify the file extension manually.

4. Note that the maximum scanning layer of a compressed file is set to 2 layers for all real-time,

manual and scheduled scan.

Actions When Virus Found

1. Click the desire action when virus was found.

2. Click

Apply

to save the settings.

10.4 Updating Virus Pattern File

Virus pattern update can be performed either manually or according to the schedule. It is required

to perform a manual update immediately when the antivirus function is activated for the first time.

Configuring a manual update

1. To download virus patterns from Internet, select

Trend Micro update server on internet

Please note that you have to specify the DNS server IP address on the

Network

TCP/IP

menu of the Administration Page.

Summary of Contents for NAS-3410













































































































Search results

Summary of Contents for NAS-3410

Reviews:

Related manuals for NAS-3410

Brands by name

Popular brands

Planet NAS-3410, User Manual

Search results

Summary of Contents for NAS-3410

Reviews:

Related manuals for NAS-3410

Brands by name

Popular brands