Planet NAS-3410 User Manual Download Page 82

Page: 82 / 108

The NAS-3410 supports CD or DVD burning. It can use ISO-9660 CD format to write data to CD

or DVD discs. Supported devices are CD-RW, DVD-RW and DVD+RW writers. Dual-layer DVD

writing is also supported.

To write data to CD/DVD discs, please insert a blank disc into the CD/DVD writer first. Next, open

the

Administration Page

and enter the

Backup

Loader/Writer

page. Then follow the steps

below.

1. Click the

Writer

tab in

Backup

Loader/Writer

2. Select the

Target Device

where you want to burn the blank CD/DVD disc(s). Above the

Target

Device

item you will see a device list for your reference.

3. Specify the source folders. Please click

Select Folders

and specify which folders to burn.

4. Specify the volume label of the CD or DVD disc.

5. Check the overwrite option if you want erase a rewriteable disc first before burning.

6. Click

Apply

to start burning CD or DVD discs.

Summary of Contents for NAS-3410













































































































Search results

Summary of Contents for NAS-3410

Reviews:

Related manuals for NAS-3410

Brands by name

Popular brands

Planet NAS-3410, User Manual

Search results

Summary of Contents for NAS-3410

Reviews:

Related manuals for NAS-3410

Brands by name

Popular brands