Planet NAS-3410, User Manual

Page: 31 / 108

23
receive trap message.
5. Select Read Only from the pull down menu if you want the corresponding management console
has read only privilege.
6. Repeat Step 2 to Step 5 if more than one management console is available. NAS-3410
supports up to 4 management consoles.
7. Enter the location information of your NAS-3410.
8. Enter the name of the contact person who has the management information of the NAS-3410.
9. You can check the checkbox beside Send a test trap to send sample trap information to validate
your setting of the SNMP settings.
10. Click Apply to save the setting.
4.10 Email Settings
You can configure email notification to notify you when there is an event occurred to the
NAS-3410. Enter the information of the SMTP server on your network in this menu; you can
configure what kind of event should trigger the email notification process in the
Event
Æ
Configuration
Æ
Advance menu.
Configuring Email Settings
1. Click the Enable SMTP Protocol checkbox to enable SMTP protocol.
2. Enter the SMTP Server Address.
3. Enter an existing user account name of the SMTP server.
4. Enter the password of the account.
5. Enter up to two email addresses you want to send email notification to when event occurred.
6. Click the Send a test email checkbox if you want to send out a test email to validate your email
setting.
7. Click Apply to save the setting.
4.11 SSL Settings
The NAS-3410 enables secure web access by supporting SSL 3.0, both for the user homepage
and the administration homepage. To use SSL 3.0, the NAS-3410 will generate a server certificate
for authentication and data encryption. By default, the server certificate is issued to the NAS-3410
designated by its IP address. You can also specify to use the server's full name on the server
certificate. The server's full name is the server name appended with its DNS suffix, such as
nas.company.com . Please refer to the TCP/IP settings for DNS suffix.
For clients to access server web-pages with secure connection, they have to install the CA
certificate first. Suppose that the server's IP address is 192.168.1.10, please open
http://192.168.1.10/admin/CA for the certificate. Choose to install the certificate when a dialog-box