« 73 »
7.2 S
YSTEM
R
ESTORATION
P
ROCEDURE
Before performing the system restoration procedure, ensure that the CD-ROM is set as the first
bootable device in BIOS. Refer to your BIOS documentation or online help for information on setting
the boot devices.
1. Insert the System Installation CD into the bootable CD-ROM drive of the host PC.
2. Reboot the host PC with the Restore CD in the drive. The following screen appears:
If setup does not detect a supported network card installed on your
system, you will see the following screen:
Refer to your network card documentation to see if your card is
one that is on the list shown. If it is listed, and you still see the
screen above, contact your dealer for assistance.
3. Connect a straight cable between the ISA-4000 uplink port and a hub or switch, and a
straight cable between the ISA-4000 LAN port and a PC.
4. Connect a power cord (connected to an AC power source) to the ISA-4000.
5. Locate the buttons on the front panel of the ISA-4000.
6. Hold down any of the buttons on the front panel as the ISA-4000 is powering up.
7. Release the button after the LCD displays the text "boot from net.”
8. The LCD displays the text “please power off now” after done.
9. Remove the CD from your PC, and reboot your computer and ISA-4000.
