« 18 »
8. Select “Obtain an IP address automatically.”
9. Select “Obtain a DNS address automatically.”
10. Click
OK
.
4.3.3 DHCP client setup in WINDOWS NT4.0
You can configure your WINDOWS NT 4.0 to be a DHCP client during installation, or it can be set
manually after the system is already installed. The steps to manually set it up are listed below.
1. Click
Start
.
2. Select
Settings
, and then select Control Panel.
3. Click
Network
.
4. Click
Protocol
.
5. Select TCP/IP Protocol.
6. Select “Obtain an IP address from a DHCP Server” and click
OK
.
4.3.4 DHCP Client Setup on Mac OS
1. Click
Apple Menu
.
2. Select Control Panel, and then select TCP/IP.
3. Select “Connect via Ethernet” and “Configure: Using DHCP Server,” and then close the
TCP/IP menu.
4. Click
Save
.
4.4 W
EB
P
UBLISHING
The ISA-4000 allows users to publish their web pages using FrontPage and FTP.
4.4.1 Publishing Web Pages with FrontPage 2000
The ISA-4000 includes the FrontPage 2000 Server Extensions, which permit the use of the client-
side FrontPage application to publish and edit web pages on the ISA-4000.
Before you use FrontPage to publish and edit your web pages, you should enable FrontPage Server
Extensions on the ISA-4000 as follows:
1. Log in to the ISA-4000 as the administrator (refer to
5.1 Logging in as an Administrator
).
2. Click
Control Panel
.
3. In the Administration menu, click
Network Services
, and then click
Web Services
:
