« 7 »
One more to
Shutdown
2. Press the front power button again. The system goes through a power down sequence. After
the power down sequence completes, the following message is displayed:
System
Halt
3. Press the rear power button to turn the server off.
2.4 R
ESETTING THE
ISA-4000
If the ISA-4000 locks up, you can reset the system by inserting an unbent paper clip into the reset
hole at the rear of the server:
Figure 2-4: Resetting the ISA-4000
After inserting the paper clip, the system reboots.
This concludes this chapter. The next chapter helps you set up the ISA-4000 browser interface.