Planet IPX-1900 User Manual Download

Page: 53 / 84

UDP.

Block

Wan IP Port Block time setting. Select

Always

By Schedule.

Day

Block Day setting, select a All / Mon-Sat./ Mon-Fri./Mon./ Tues./

Wed./Thu./Fri./Sat./Sun.

Time

Block Time setting, select time range is 00:00 to 23:59.

Table 4-9. Packet filter-WAN description

LAN

Enable/Disable

Internet to LAN filter function, default setting is

Enable

. A

prohibitive rule set should only allow the necessary

Internet/DMZ services to LAN (Local Area Network) clients.

Enable

Enable/Disable the WAN IP source port rules, default setting

Disable

Source IP

This is the filter source IP address to LAN.

Dest. Port

This is the port used for source IP.

Protocol

This Protocol Used for the WAN Filter service. Select either

TCP or UDP.

Day

Block Day setting, select All / Mon-Sat./ Mon-Fri./Mon./

Tues./ Wed./Thu./Fri./Sat./Sun.

Time

Block Time setting, select time range is 00:00 to 23:59

Table 4-10. Packet filter-LAN description

MAC

Enable/Disable

Form internet MAC filter function, default setting is

Enable.

Block

Wan IP Port Block time Setting. Select Always or

Schedule

Day

Block Day setting, select a All / Mon-Sat./ Mon-Fri./Mon./

Tues./ Wed./Thu./Fri./Sat./Sun.

Time

Block Time setting, select time range is 00:00 to 23:59

Table 4-11. Packet filter-MAC description

URL Filter

URL filter allows you to block sites based on a black list and white list. Sites matching the black list but

not matching the white list will be automatically blocked and closed.

Summary of Contents for IPX-1900





















































































Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands

Planet IPX-1900, User Manual

Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands