Planet IPX-1900 User Manual Download

Page: 78 / 84

Figure D-18. Hot Line to auto-attendant of IPX-1900

STEP 8:

After all of devices have registered to IP PBX successfully, the

Extension Status

page will show

the registration status:

Figure D-19. Extension status page with Phone and Gateway registered

Test the Scenario:

1. VIP-154T pick up the telephone

2. Dial the number:

will hear the dial tone, and dial the number: 12345678. This call will hunt the

FXO port of VIP-480FO and shall be able connect to the User A.

3. Then the telephone of User A will ringing, User A can pick up the handset and talk with

VIP-154T.

4. Both VIP-154T and User A hang up the calls.

5. User A pick up the telephone and dial the number: 23456789 should be able to connect to the

Auto Attendant System of IP PBX.

6. The User A will hear the prompts, and dial the extension number: 100 shall be able connect to

the VIP-192.

7. Then the VIP-192 should ringing, and it to pick up the call then talk with User A.

Summary of Contents for IPX-1900





















































































Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands

Planet IPX-1900, User Manual

Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands