Planet IPX-1900 User Manual Download

Page: 56 / 84

IP-PBX will automatically update your DDNS server every time it receives a different IP address.

Figure 4-21. DDNS settings

Enable

Enable/Disable the DDNS service, default setting is Disable.

DDNS Server Type

The IP-PBX support two types of DDNS, DynDns.org or

No-IP.com

DDNS Username

The username which you register in DynDns.org or No-IP.com

website.

DDNS Password

The password which you register in DynDns.org or No-IP.com

website.

Confirmed Password

Confirm the password which you typing.

Hostname to register

The hostname which you register in DynDns.org or No-IP.com

website

Table 4-14. DDNS description

SNMP

The simple network management protocol (SNMP) forms part of the internet protocol suite as defined

by the Internet Engineering Task Force (IETF). SNMP is used by network management systems to

monitor network-attached devices for conditions that warrant administrative attention. It consists of a

set of standards for network management, including an Application Layer protocol, a IP-PBXbase

schema, and a set of IP-PBX objects.

Summary of Contents for IPX-1900





















































































Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands

Planet IPX-1900, User Manual

Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands