Planet IPX-1900 User Manual Download

Page: 42 / 84

Static IP

If you are a leased line user with a fixed IP address, enter in the IP address, subnet mask, gateway

address, and DNS (domain name server) address(es) provided to you by your ISP. Each IP address

entered in the fields must be in the appropriate IP form, which are four IP octets separated by a dot

(x.x.x.x). The Router will not accept the IP address if it is not in this format.

Example: 168.95.1.2

Figure 4-2. WAN-Static IP settings

IP Address

Check with your ISP provider.

Subnet Mask

Check with your ISP provider.

Default Gateway

Check with your ISP provider.

Table 4-1. WAN-Static IP description

DHCP

Dynamic Host Configuration Protocol (DHCP), Dynamic IP (Get WAN IP Address automatically). If you

are connected to the Internet through a Cable modem line, then a dynamic IP will be assigned.

WAN port gets the IP Address, Subnet Mask and default gateway
IP address automatically, if DHCP client is successful.

Note

Summary of Contents for IPX-1900





















































































Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands

Planet IPX-1900, User Manual

Search results

Summary of Contents for IPX-1900

Reviews:

Related manuals for IPX-1900

Brands by name

Popular brands