Planet IGSW-2840, User Manual

Page: 60 / 671

User’s Manual of IGSW-2840
60

Example 1: Save Current Configuration setting
To save all applied changes and set the current configuration as startup configuration. The startup-configuration file will be load
automatically across a system reboot.
1. Click System

File Management

Copy Operation
2. Select “ running-config to startup-config ” as the file transfer method
3. Select the startup file name used for startup on the Industrial Managed Switch to overwrite or specify a new file name, then
click Apply
Figure 4-2-7 Configuration saving screenshot
You can also select any configuration file as the start-up configuration by using the
System/File Management /Set Start-Up page.
4. If you specify a new file name to startup-config, click System

File Management

Set Start-up to check the specified file
be set to “Y” in the “Startup” column.
Figure 4-2-8 Set Start-up screenshot