Planet IGSW-2840, User Manual

Page: 475 / 671

User’s Manual of IGSW-2840
475
1. RADIUS authentication must be activated and configured properly for the
web authentication feature to work properly. (See “RADIUS Client” on page
4-88.)
2. Web authentication cannot be configured on trunk ports.
Command Function Mode
web-auth login-attempts Defines the limit for failed web authentication login attempts GC
web-auth quiet-period Defines the amount of time to wait after the limit for failed login
attempts is exceeded.
GC
web-auth session-timeout Defines the amount of time a session remains valid GC
web-auth system-auth-control Enables web authentication globally for the switch GC
web-auth Enables web authentication for an interface IC
web-auth re-authenticate (Port) Ends all web authentication sessions on the port andforces the
users to re-authenticate
PE
web-auth re-authenticate (IP) Ends the web authentication session associated with the
designated IP address and forces the user to re-authenticate
PE
show web-auth Displays global web authentication parameters PE
show web-auth interface Displays interface-specific web authenticationparameters and
statistics
PE
show web-auth summary Displays a summary of web authentication port parameters and
statistics
PE
Table 5-43 Web Authentication
web-auth login-attempts
This command defines the limit for failed web authentication login attempts. After the limit is reached, the switch refuses further
login attempts until the quiet time expires. Use the no form to restore the default.
Syntax
web-auth login-attempts count
no web-auth login-attempts
count -The limit of allowed failed login attempts. (Range: 1-3)
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
Console(config)#web-auth login-attempts 2
Console(config)#