Planet IGSW-2840, User Manual

Page: 434 / 671

User’s Manual of IGSW-2840
434
command described on page 4-93.
-server-group -Specifies the name of a server group configured with the aaa group server command described on 4-97.
(Range: 1-255 characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
Note that the default and method-name fields are only used to describe the accounting method(s) configured on the
specified RADIUS or servers, and do not actually send any information to the servers about the methods to
use.
Example
Console(config)# aaa accounting dot1x default start-stop group radius
Console(config)
aaa accounting exec
This command enables the accounting of requested Exec services for network connections. Use the no form to disable the
accounting service.
Syntax
aaa accounting exec {default | method-name} start-stop group {radius | |server-group} no aaa accounting exec
{default | method-name}
default - Specifies the default accounting method for service requests.
method-name - Specifies an accounting method for service requests. (Range: 1-255 characters)
start-stop - Records accounting from starting point and stopping point.
group -Specifies the server group to use. -radius -Specifies all RADIUS hosts configure with the radius-server host
command described on page 4-88. - - Specifies all hosts configure with the tacacs-server host
command described on page 4-93.
-server-group -Specifies the name of a server group configured with the aaa group server command described on 4-97.
(Range: 1-255 characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration