Planet IGSW-2840 User Manual Download Page 175

Page: 175 / 671

User’s Manual of IGSW-2840

175

If you have host devices that do not support GVRP, you should configure static or untagged VLANs

for the switch ports connected to these devices (as described in “Adding Static Members to VLANs

(VLAN Index)”). But you can still enable GVRP on these edge switches, as well as on the core

switches in the network.

■

VLAN and Link aggregation Groups

In order to use VLAN segmentation in conjunction with port link aggregation groups, you can first set the port link aggregation

group(s), and then you may configure VLAN settings. If you wish to change the port link aggregation grouping with VLAN

already in place, you will not need to reconfigure the VLAN settings after changing the port link aggregation group settings.

VLAN settings will automatically change in conjunction with the change of the port link aggregation group settings

4.8.1.1 VLAN Basic Information

The VLAN Basic Information page displays basic information on the VLAN type supported by the Industrial Managed Switch.

Figure 4-8-1

VLAN Basic Information screenshot

The page includes the following fields:

Object

Description

•

VLAN Version Number

The VLAN version used by this Industrial Managed Switch as specified in the

IEEE 802.1Q standard.

•

Maximum VLAN ID

Maximum VLAN ID recognized by this Industrial Managed Switch.

•

Maximum Number of

Supported VLANs

Maximum number of VLANs that can be configured on this Industrial Managed

Switch.

4.8.1.2 GVRP Status

GARP VLAN Registration Protocol (GVRP)

defines a way for switches to exchange VLAN information in order to register

VLAN members on ports across the network.

Summary of Contents for IGSW-2840
































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IGSW-2840

Reviews:

Brands by name

Popular brands

Planet IGSW-2840, User Manual

Search results

Summary of Contents for IGSW-2840

Reviews:

Brands by name

Popular brands