Planet IGSW-2840, User Manual

Page: 416 / 671

User’s Manual of IGSW-2840
416
Storage Type: volatile
Row Status: active
Console#
Field Description
groupname Name of an SNMP group.
security model The SNMP version.
readview The associated read view.
writeview The associated write view.
notifyview The associated notify view.
storage-type The storage type for this entry.
Row Status The row status of this entry.
snmp-server user
This command adds a user to an SNMP group, restricting the user to a specific SNMP Read, Write, or Notify View. Use the no
form to remove a user from an SNMP group.
Syntax
snmp-server user username groupname [remote ip-address] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password
[priv des56 priv-password]] no snmp-server user username {v1 | v2c | v3 | remote}
username - Name of user connecting to the SNMP agent.
(Range: 1-32 characters)\
groupname -Name of an SNMP group to which the user is assigned. (Range: 1-32 characters)
remote - Specifies an SNMP engine on a remote device.
ip-address -The Internet address of the remote device.
v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
encrypted -Accepts the password as encrypted input.
auth - Uses SNMPv3 with authentication.
md5 | sha - Uses MD5 or SHA authentication.
auth-password -Authentication password. Enter as plain text if the encrypted option is not used. Otherwise, enter an
encrypted password. (A minimum of eight characters is required.)
priv des56 - Uses SNMPv3 with privacy with DES56 encryption.
priv-password - Privacy password. Enter as plain text if the encrypted option is not used. Otherwise, enter an encrypted
password.
Default Setting
None
Command Mode