manualshive.com logo in svg

Planet IGSW-24040T, User Manual

Share
Download
Planet IGSW-24040T User Manual Download Page 95

User’s Manual of IGSW-24040T 

 

The page includes the following fields: 

Receive Total and Transmit Total 

Object 

Description 

 

Rx and Tx Packets

 

The number of received and transmitted (good and bad) packets 

 

Rx and Tx Octets

 

The number of received and transmitted (good and bad) bytes. Includes FCS, but 

excludes framing bits. 

 

Rx and Tx Unicast

 

The number of received and transmitted (good and bad) unicast packets. 

 

Rx and Tx Multicast

 

The number of received and transmitted (good and bad) multicast packets. 

 

Rx and Tx Broadcast

 

The number of received and transmitted (good and bad) broadcast packets. 

 

Rx and Tx Pause 

A count of the MAC Control frames received or transmitted on this port that have 

an opcode indicating a PAUSE operation. 

 

Receive and Transmit Size Counters 

The number of received and transmitted (good and bad) packets split into categories based on their respective frame 

sizes.  

Receive and Transmit Queue Counters 

The number of received and transmitted packet is per input and output queue.   

Receive Error Counters 

Object 

Description 

 

Rx Drops

 

The number of frames dropped due to lack of receives buffers or egress 

congestion. 

 

Rx CRC/Alignment

 

The number of frames received with CRC or alignment errors. 

 

Rx Undersize

 

The number of short

 1

 frames received with valid CRC. 

 

Rx Oversize

 

The number of long

 2

 frames received with valid CRC. 

 

Rx Fragments

 

The number of short

 1

 frames received with invalid CRC. 

 

Rx Jabber 

The number of long

 2

 frames received with invalid CRC. 

 

Rx Filtered 

The number of received frames filtered by the forwarding process.   

Short frames are frames that are smaller than 64 bytes. 

Long frames are frames that are longer than the configured maximum 

frame length for this port.

 

 

95 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands