manualshive.com logo in svg

Planet IGSW-24040T, User Manual

Share
Download
Planet IGSW-24040T User Manual Download Page 179

User’s Manual of IGSW-24040T 

 

: Click to undo any changes made locally and revert to previously saved values. 

: Return to the previous page. 

 

 

4.9.4 Port QoS Configuration  

This page allows you to configure QoS settings for each port. 

  Frames can be classified by 4 different QoS classes are Low, Normal, Medium, and High. 

  The classification is controlled by a QCL that is assigned to each port. 

  A QCL consists of an ordered list of up to 12 QCEs. 

  Each QCE can be used to classify certain frames to a specific QoS class. 

  This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority. 

  Frames not matching any of the QCEs are classified to the default QoS class for the port.   

  The settings relate to the currently selected unit, as reflected by the page header. 

 

The Port QoS Configuration screen in

 Figure 4-9-9

 appears. 

 

179 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands