Planet IGSW-24040T User Manual Download Page 122

Page: 122 / 521

User’s Manual of IGSW-24040T

Figure 4-6-5

VLAN Port Status for User Static Page Screenshot

The page includes the following fields:

Object

Description



Port

The logical port for the settings contained in the same row.



PVID

Shows the VLAN identifier for that port. The allowed values are 1 through 4095.

The default value is 1.



VLAN Aware

Show the VLAN Awareness for the port.

If VLAN awareness is enabled, the tag is removed from tagged frames received

on the port. VLAN tagged frames are classified to the VLAN ID in the tag.

If VLAN awareness is disabled, all frames are classified to the Port VLAN ID and

tags are not removed.



Ingress Filtering

Show the ingress filtering for a port. This parameter affects VLAN ingress

processing. If ingress filtering is enabled and the ingress port is not a member of

the classified VLAN of the frame, the frame is discarded.



Frame Type

Shows whether the port accepts all frames or only tagged frames. This

122

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Search results

Summary of Contents for IGSW-24040T

Reviews:

Brands by name

Popular brands

Planet IGSW-24040T, User Manual

Search results

Summary of Contents for IGSW-24040T

Reviews:

Brands by name

Popular brands