manualshive.com logo in svg

Planet IGSW-24040T, User Manual

Share
Download
Planet IGSW-24040T User Manual Download Page 119

User’s Manual of IGSW-24040T 

 

 

119 

 

4.6.5 VLAN Membership Configuration 

 

Adding Static Members to VLANs (VLAN Index) 

Use the VLAN Static Table to configure port members for the selected VLAN index. The VLAN membership configuration for the 

selected the switch can be monitored and modified here. Up to 255 VLANs are supported. This page allows for adding and 

deleting VLANs as well as adding and deleting port members of each VLAN. The VLAN Membership Configuration screen in 

Figure 4-6-3

 appears. 

 

Figure 4-6-3

 VLAN Membership Configuration Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

 

Delete

 

To delete a VLAN entry, check this box.   

 

VLAN ID

 

Indicates the ID of this particular VLAN. 

 

Port Members

 

A row of check boxes for each port is displayed for each VLAN ID. To include a 

port in a VLAN, check the box. To remove or exclude the port from the VLAN, 

make sure the box is unchecked. By default, no ports are members, and all 

boxes are unchecked. 

 

Adding a New VLAN

 

Click to add a new VLAN ID. An empty row is added to the table, and the VLAN 

can be configured as needed. Legal values for a VLAN ID are 1 through 4095. 

The VLAN is enabled on the selected the switch when you click on "Save". A 

VLAN without any port members on any unit will be deleted when you click 

"Save". 

The button can be used to undo the addition of new VLANs. 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands