manualshive.com logo in svg

Planet IGSW-24040T, User Manual

Share
Download
Planet IGSW-24040T User Manual Download Page 204

User’s Manual of IGSW-24040T 

 

 

Logging 

Specify the logging operation of this port. The allowed values are:   

Enabled

: Frames received on the port are stored in the System Log.   

Disabled

: Frames received on the port are not logged.   

The default value is "Disabled".   

Please note that the System Log memory size and logging rate is limited. 

 

Shutdown 

Specify the port shut down operation of this port. The allowed values are:   

Enabled

: If a frame is received on the port, the port will be disabled.

   

Disabled

:

 

Port shut down is disabled. 

The default value is "Disabled". 

 

Counter 

Counts the number of frames that match this ACE. 

 

Buttons 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values.

 

: Click to refresh the page; any changes made locally will be undone. 

: Click to clear the counters. 

 

 

4.10.5 ACL Rate Limiter Configuration 

Configure the rate limiter for the ACL of the switch.   

The ACL Rate Limiter Configuration screen in 

Figure 4-10-5

 appears. 

 

204 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands