manualshive.com logo in svg

Planet IGSW-24040T, User Manual

Share
Download
Planet IGSW-24040T User Manual Download Page 65

User’s Manual of IGSW-24040T 

 

4.2.11 System Log 

The switch system log information is provided here. The System Log screen in 

Figure 4-2-14

 appears. 

 

Figure 4-2-14

 System Log Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

 

ID 

The ID (>= 1) of the system logging entry. 

 

Level 

The level of system logging entry. The following level types are supported: 

Info

: Information level of the system log. 

Warning

: Warning level of the system log. 

Error

: Error level of the system log. 

All

: All levels. 

 

Time 

The time of the system log entry. 

 

Message 

The message of the system logging entry. 

 

Buttons 

Auto-refresh 

  : Check this box to enable an automatic refresh of the page at regular intervals. 

: Click to refresh the page; any changes made locally will be undone. 

: Clear all statistics. 

: Hide the statistics. 

: Download the statistics. 

: Updates the system log entries, starting from the first available entry ID. 

: Updates the system log entries, ending at the last entry currently displayed. 

 

65 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands