manualshive.com logo in svg

Planet IGSW-24040T, User Manual

Share
Download
Planet IGSW-24040T User Manual Download Page 253

User’s Manual of IGSW-24040T 

 

host IP address matched the entry. 

 

Buttons 

: Click to add a new access management entry. 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values. 

 

 

4.12.3 Access Management Statistics 

This page provides statistics for access management. The Access Management Statistics screen in 

Figure 4-12-3

 appears. 

 

Figure 4-12-3

 Access Management Statistics Overview Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

 

Interface 

The interface that allowed remote host can access the switch. 

 

Receive Packets 

The received packets number from the interface under access management 

mode is enabled. 

 

Allow Packets 

The allowed packets number from the interface under access management 

mode is enabled. 

 

Discard Packets 

The discarded packets number from the interface under access management 

mode is enabled. 

 

Buttons 

Auto-refresh 

: Check this box to enable an automatic refresh of the page at regular intervals. 

: Click to refresh the page immediately. 

: Clear all statistics. 

 

253 

 

Summary of Contents for IGSW-24040T










































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands