Planet ADSL 2/2+ VPN Firewall Router ADW-4302A v2 User Manual Download Page 113

Page: 113 / 142

Advanced Features

E-mail Alerts

Send E-mail
alerts immedi-
ately

You can choose to have alerts E-mailed to you, by checking
the desired checkboxes. The ADW-4302v2 can send an im-
mediate alert when it detects a significant security incident
such as

•

A known hacker attack is directed at your IP address

•

A computer on the Internet scans your IP address for open
ports

•

Someone on your LAN (Local Area Network) tries to visit a
blocked site.

E-mail Logs

Send Logs

Select the desired option for sending the log by E-mail.

•

Never

(default) - This feature is disabled; Logs are not

sent.

•

When log is full

- The time is not fixed. The log will be

sent when the log is full, which will depend on the volume
of traffic.

•

Hourly, Daily, Weekly...

- The log is sent on the interval

specified.

•

Daily

is selected, the log is sent at the time specified.

Select the time of day you wish the E-mail to be sent.

•

Weekly

is selected, the log is sent once per week, on the

specified day, at the specified time.
Select the day and the time of day you wish the E-mail to
be sent.

Note:

If the log is full before the time specified to send it, it will be
sent regardless of the day and time specified.

107

Summary of Contents for ADSL 2/2+ VPN Firewall Router ADW-4302A v2















































































































































Search results

Summary of Contents for ADSL 2/2+ VPN Firewall Router ADW-4302A v2

Reviews:

Related manuals for ADSL 2/2+ VPN Firewall Router ADW-4302A v2

Brands by name

Popular brands

Planet ADSL 2/2+ VPN Firewall Router ADW-4302A v2, User Manual

Search results

Summary of Contents for ADSL 2/2+ VPN Firewall Router ADW-4302A v2

Reviews:

Related manuals for ADSL 2/2+ VPN Firewall Router ADW-4302A v2

Brands by name

Popular brands